Call Us: +86-28-68731157Email: info@jrt-measure.com
enLanguage

Advantages Of Laser Ranging Sensors

Aug 27, 2019

Advantages of laser ranging sensors

Laser Ranging and Intelligent Transportation: The application of the Internet of Things is very extensive. The reason why intelligent transportation has great development potential has become a key area for the development of the Internet of Things. It is inseparable from China's national conditions. The energy consumption of automobiles is a prominent problem facing the current transformation of economic development. In the face of the energy consumption, pollution and congestion caused by these transportation industries, the development of intelligent transportation is one of the solutions. The following discusses and exemplifies some possible application directions of laser ranging technology in IOT intelligent traffic, including: laser speed sensor, car collision avoidance system, traffic flow monitoring, vehicle drawing, vehicle pedestrian illegal monitoring and other sophisticated monitoring. Application in measurement, etc. 1. Automobile collision avoidance detector: In general, the laser ranging sensor of most existing automobile collision prevention systems uses a laser beam to identify the distance between the target vehicle in front of or behind the vehicle in a non-contact manner. When the distance between the cars is less than the predetermined safety distance, the automobile anti-collision system performs emergency braking on the vehicle, or issues an alarm to the driver, or comprehensively determines the speed of the vehicle, the distance between the vehicle, the braking distance of the vehicle, the response time, etc. In response, a large number of traffic accidents can be reduced. The advantages of using it on the highway are even more obvious. 2. Traffic flow monitoring and vehicle outline drawing: This type of use is generally fixed to the gantry of high-speed or important intersections. The laser launches and receives the vertical ground downwards, aligning with the middle position of a lane. When there is a vehicle passing, the laser The ranging sensor can output the relative change value of the measured distance value in real time, and then depict the contour of the measured vehicle. This measurement method generally uses a ranging range of less than 30 meters, and requires a relatively high laser ranging rate, and generally requires 100 Hz. This can achieve good results for monitoring on important road sections. It can distinguish between various types of vehicles. The sampling rate of the body height scanning can reach 10 cm (at a sampling rate of 11 cm at 40 Km/h).