JRT Laser Module Upgrade: 3rd Generation M703A

Today, It introduces you to our old model M703A 3rd generation update, old look, new laser software. Because we have been focusing on laser technology, keeping laser components fresh, updating laser software to make laser ranging more accurate and faster.

M703A is the third generation of M512A, M701A, M703A, small size with 45*25*12mm, baud rate 19200. We are constantly optimizing and upgrading it.

Here are its specification:

First, the measurement range of M703A is 40m and 60m, the accuracy can reach +/-1.5mm, and the frequency is 8HZ.

Second, the main pins are VCC, GND, RX, TX nCTRL, PWR_ON, nCTRL is the continuous measurement control pin, the low level activates the continuous measurement mode, and the low level activates this pin to achieve 8Hz.

Third, its communication operation is simple and easy to operate, and ASCII code is favored by many professional users.

Module using:

O: Turn on the laser, the module returns a string: ",OK!"

C: Turn off the laser, the module returns a string: ",OK!"

S: Read the module status, the module returns the current temperature, input voltage and other strings.

D: Enable automatic measurement mode.

M: Enable slow test,

F: Enable quick measurement,

If you are looking for a laser sensor, welcome to contact us and don't miss our M703A.

Chengdu JRT Main Ranging Sensors: Industrial Laser Distance Sensor, Laser Distance Meter Sensor, Long Rangefinder Module, TOF High Frequency LiDAR Sensor.