Precautions For Phase Laser Measurement Sensor Sample Test_JRT

Let’s introduce the precautions for the first test phase type product:

1. Please wear the provided anti-static gloves or take other anti-static measures after receiving the goods.

2. Please pay attention to whether the package of the laser sensor is complete, and whether there is obvious damage to the components after taking out the module (products without shell).

3. Please connect the pins according to the instructions.

4. If the distance measuring sensor does not have a casing, please pay attention to ensure that the power supply is DC2.5-3.3V, 3V is better.

5. Please pay attention to whether there is current after wiring. If there is current, it means that the module is working normally.

6. If using the serial assistant to test samples, please check again Hex, serial port, wiring, voltage, baud rate before starting the measurement command.

7. Send a command during the test, and the data returns AA to indicate a correct response, and FF to indicate an invalid value or an error.

8. After the laser distance transducer works normally, please measure according to the corresponding command

9. If there is a measurement error, please contact the sales staff, we will find a solution for you as soon as possible.

This is the test precautions for phase products, if you have any questions, please contact us in time.

If you have more project wanna use LiDAR Distance Module Sensors & Tof Sensor, please let us know the details, then we will help you evaluate the project together.

Chengdu JRT Main Ranging Sensors: Industrial Laser Distance Sensor, Laser Distance Meter Sensor, Long Rangefinder Module, TOF High Frequency LiDAR Sensor.

For more info, please feel free to contact us