How do I use a laser distance meter?

Laser distance meter is a precision measuring instrument, which has huge advantages in the measurement of length, area and volume. The laser distance sensor of JRT supports distance measurement of 10m / 30m / 60m / 100m / 150m, and the measurement accuracy is about 1.5mm.

Advantages of laser rangefinder:

1. Fast speed: With the laser rangefinder, only one button is needed for fast measurement.

2. High accuracy: The accuracy is about 1.5mm. Does not cause the common bending problems of tape measure.

3. Independent operation: No need to have someone pull the other end like a tape measure.

4. No ladder required: Safely measure hard-to-reach areas.

5. Convenience: Measure parts that were previously difficult to measure, such as artificial ceilings or other equipment.

6. Distance: Measuring a distance of 10 meters is as easy as measuring a distance of 150 meters.

Instructions:

1. First of all, install the battery for the laser rangefinder and charge it directly. Before use, fully charge the battery.

2. Turn on the power switch, and you can see that the rangefinder is in the standby state through the eyepiece. You need to choose a unit before measuring again.

3. Long press the mode key to directly select the desired unit.

4. Aim at the measured object through the internal LCD display in the rangefinder eyepiece.

5. After confirming aiming, tap the launch button.